Dome Camera night vision fogginess haze IR bounce

When installing dome cameras (eyeball style), sometimes you will see the image totally white, covered with a white haze, or foggy in appearance when the night vision turns on.


This is caused by IR bounce back into the sensor and can be easily rectified by aiming the camera slightly down so there is a 3mm space around the glass front.


Sometimes it may also be caused by a white downpipe or wall reflecting the IR back into the camera.


All eyeball style dome cameras can be affected by this.



The symptom 

Night Vision IR Bounce Back




The cause/solution

Make sure you have between 3mm and 8mm of white between the case and the LED glass panel.


Night Vision IR Bounce Back


Categories: OzSpy Branded DVRs and Cameras
Contact Support